MUSTANG PARTS INVENTORY
REDUCTION
BLOW-OUT!!
COIL-OVER
CONVERSION KIT
Convert your H-Series Mustang Struts
to coil over.
MUSTANG
PRO ACTIVE SYSTEMS
System comes to you complete with
the tubular K-member, tubular control-arms, caster/camber plates, H-Series
Mustang Struts, coil-over kits, and springs
Introducing
the ultimate aluminum strut for the Fox and SN95 Mustang chassis!
After examining and reviewing the pitfalls in existing strut designs (such
as excess weight, piston bind, and inconsistency in valving and quality),
QA1 Motorsports started from ground zero and engineered a truly remarkable
strut to solve all of those problems and more. The H-Series
Mustang Strut is the lightest ever designed for the Mustang.
Zero piston rod deflection and elimination of piston bind is accomplished
with the double end support. Valving adjustment is achieved from
under the hood with a turn of the adjuster knob, and the adjustment range
allows you to adjust from street to strip to road coarse with ease.
The large body, mono-tube design allows the use of more fluid and a larger
piston than other strut designs. More fluid means lower temperatures
and the large piston allows better fluid control for valving. The
aluminum body is threaded for coil-over conversion, if desired. These
struts are hard anodized black, both internally and externally for superior
durability and appearance. Finally, QA1 Motorsports quality system
ISO 9001 is certified, ensuring that you receive only the highest quality
products. The H-Series Mustang Strut
is for everyone who has
said, "The next guy who makes a Muntage strut should start with a clean
sheet of paper!" QA1 listened to you and HERE IT IS!
KEY FEATURES:
1979 - 93 Mustang 5.0 H2001
1994 - Present Mustang 5.0 & 4.6 H2003
1994 - Present Mustang 5.0 & 4.6 - 1" Lowered H2002
MU175
This kit consists of everything you need to convert your
H-Series struts to coil overs with 175 lb. springs. The kit includes (2)
175 lb. springs, (2) 2-piece upper spring caps with bearings, (2) spring
seats, (2) spring seat jam nuts, and (2) spring seat washers.
MU225
This kit consists of everything you need to convert your
H-Series struts to coil overs with 225 lb. springs. The kit includes (2)
225 lb. springs, (2) 2-piece upper spring caps with bearings, (2) spring
seats, (2) spring seat jam nuts, and (2) spring seat washers.
MU1CCM
This kit consists of everything, excluding springs, you
need to convert your H-Series struts to coil overs. The kit includes (2)
2-piece upper spring caps with bearings, (2) spring seats, (2) spring seat
jam nuts, and (2) spring seat washers.
MU1LSM
This lower spring mount kit, allowing you to use part
of an already existing coil over kit on the H-Series struts, consists of
(2) spring seats, (2) spring seat jam nuts, and (2) spring seat washers.
The
1979 - present Mustang 5.0/4.6 is one of the most popular high performance
cars ever built, and QA1 Motorsports has engineered the Mustang Rear Shock
specifically for these vehicles. Our exclusive machined aluminum,
bright anodized, Mustang Rear Shock us the most advanced stock mount shock
available. With 12 valving adjustment settings available at the touch
of one knob, you can easily fine tune bump and reboundto give you custom
performance and ride. And there is no need to remove the shock from
the vehicle to make adjustments - QA1 Motorsports has designed this shock
to be user-friendly!
As with all of QA1 Motorsports aluminum shocks, the Mustang Rear Shock uses the same 5/8" centerless ground, hard chrome piston rod and the sealing system is the best in the industry - it nearly eliminates seal drag, yet easily handles the rigors of everyday use. Plus, the Mustang shocks are rebuildable and revalvable for a lifetime of high performance use and customizing as your car is updated.
This is simply the best and most versatile shock for the Mustang.
MU-7855-P
The Mustang Pro-Active System, is the most advanced bolt-on front suspension system ever assembled for the Mustang 5.0 or the 4.6.
The System comes to you complete with the tubular K-member, tubular control-arms, caster/camber plates, H-Series Mustang Struts, and coil-over kits with your choice of 175 or 225 lb. springs.
This system has it all – quality, performance, and adjustability. Whether you are a daily driver and a weekend racer, Pro 5.0 driver or just looking for incredible handling, the Mustang Pro-Active System does it all.
Pro-Active System - Pro-Comp. Control Arms (Rod End Mounted)
|
|
Kit Includes 175 lbs. Springs |
Kit Includes 225 Lbs. Springs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Active System - Econo Street Control Arms (Bushing Mounted)
|
|
Kit Includes 175 lbs. Springs |
Kit Includes 225 Lbs. Springs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QA1 Motorsports K-Member offers weight savings of up to 28 lbs. when compared to factory k-members. Designed from the ground up with improved anti-dive, ackerman angle, and bump steer, our K-Members are a direct bolt-on swap, complete with motor mount pads. All factory mounting points have been digitally indexed off of factory new K-members. Knowing that 5.0 and 4.6 Mustang owners will make many different modifications, this K-Member is capable of accepting just about anything. The spring perches for factory style spring use is a bolt-on option. Header and oil pan clearances are taken into consideration. Steering geometry is improved for maximum performance. Use of stock lower control arms or tubular control arms are also an option for the owner. All of this together makes the QA1 K-Member the most accurate and versatile in the industry. Please specify ‘79 – ‘95 or ‘96 and later.
MU-1TK 1996-2001
MU-2TK 1979-1993
QA1 Motorsports commitment to the Mustang 5.0 and 4.6 continues with the ultimate in Tubular Control Arms. These control arms reduce unsprung weight while improving weight distribution. They also offer improved caster/camber adjustments. QA1 Motorsports Shocks – Eco Street Arms are an economical choice in tubular control-arms for the street/strip and serious handling crowd. They are built with the QA1 exclusive bushings and are engineered for performance. The Eco Streets offer value without sacrificing ride quality.
The Pro-Comp series control arms are the extreme in performance.
These arms utilize the QA1 exclusive XMR series rod ends. These chrome
moly heat treated rod ends utilize our exclusive Kevlar®/Teflon®
lining for superior performance and durability. The Pro-Comp series includes
control arm spacers to allow the control arms to be positioned further
forward or back from the factory placement.
ECO STREET - MU1ESA
PRO-COMP - MU1TCA
* Tubular control arms must use coil over kits.
MUSTANG ADJUSTABLE UPPER STRUT MOUNT KIT
QA1 Motorsports high quality Adjustable Upper Strut Mount Kits for Mustang offer many features not found in other brands. For example, they are built with an aircraft quality replaceable bearing. The bearing housing is tig-welded to the upper plate for the utmost in strength and control. This kit permits caster adjustment for improved handling and corrects negative camber due to coil kits. Also included are spacers for increased front end travel.
CC100MU - 1979-93
CC102MU - 1994-95
CC104MU - 1996-up